No hot water? Leaking? Strange noises?
Water heater repair service for homes and businesses in Waxahachie, TX
A water heater that stops working, leaks or runs lukewarm usually has one thing wrong with it. Call and describe what yours is doing. We’ll help you work out whether it is a repair, and what to do next if it is not.
Speak with a water heater specialist.
- Tank & tankless heaters
- Gas & electric
- Diagnosis first
- Homes & businesses
What gets repaired
What is wrong with your water heater, and what usually causes it
Most repairs come down to one worn part. Finding the right one is most of the job, which is why the heater gets checked before anything is replaced.
| What you notice | What is usually behind it | Heater type |
|---|---|---|
| Water on the floor or a leaking tank | A fitting, valve or the tank itself. Shut off the water and the power or gas first, then see where it is coming from. | All |
| No hot water or never hot enough | A failed heating element or thermostat is the most common cause on an electric heater. | Electric |
| Pilot will not stay lit, or no heat at all | A worn thermocouple is a common reason the pilot goes out. Burner and gas control problems show up as no heat. | Gas |
| Dripping from a valve on top or the side | The temperature and pressure relief valve is the tank’s safety valve. If it drips or discharges, it needs to be looked at, not capped off. | Both |
| Popping, rumbling or less hot water | The anode rod protects the inside of the tank from rust. Sediment and scale collect at the bottom, which causes the noise and cuts down the hot water you get. | Both |
| Lukewarm water, or a leak at a fitting | A broken dip tube can send cold water to the top of the tank. A leak at a fitting or drain valve is often fixable, unlike a leak through the tank wall. | Both |
| Error code, or hot water that cuts out | Flow and flame sensors and scale buildup are the usual causes. Tell us the make and any code on the display when you call. | Tankless |
Before you call
A few safe things to check first
None of these replace a repair. They help you describe the problem, and sometimes they turn up something simple.
Is it only one faucet?
If hot water is missing at just one tap, the problem is likely that fixture, not the heater. If every tap is cold or lukewarm, it is the heater.
Look at the power and the setting
On an electric heater (see electric water heater repair), check that the breaker has not tripped. On any heater, check that the temperature setting has not been changed or turned down.
Look for water around the base
Note whether it is coming from a pipe or valve on top, or from the tank itself. That one detail tells a lot, so mention it when you call.
Repair or replace?
When a repair makes sense, and when it does not
A failed part can be fixed. A tank that has rusted through cannot. The question is which one you have.
Usually a repair
No hot water or lukewarm water, a pilot that will not stay lit, a tripped breaker or a bad thermostat, a dripping relief valve, or a leak at a fitting. These are parts, and the heater is otherwise sound.
Usually a replacement
Water coming out of the tank body, rusty hot water, or an older heater that keeps failing in new ways. When the tank itself is the problem, fixing parts only delays it.
If it turns out the heater needs replacing, see water heater replacement and installation for what that involves. Heater still working and you want it checked or flushed? See water heater maintenance and flushing. Thinking about tankless? See tankless water heater installation.
What to expect
How a water heater repair call goes
You call and describe it
Tell us the type of heater (gas, electric or tankless), roughly how old it is, and what it is doing. There are no forms to fill out.
The cause gets found
The heater is checked to find what is actually wrong, so you are not paying to swap parts on a guess.
It gets fixed, or you get a straight answer
If a repair fits, that is where we start. If the heater is past fixing, we say so and talk through replacement.
Service area
Water heater repair in Waxahachie and nearby
Based in Waxahachie and serving the surrounding Ellis County towns, for homes and businesses.
- Waxahachie
- Midlothian
- Red Oak
- Ennis
- Maypearl
- Ovilla
- Mansfield
Water heater repair: common questions
What is the most common problem with a hot water heater?
The ones that come up most are no hot water or not enough of it, a leak, a pilot light that will not stay lit on a gas heater, and noise from sediment in the tank. The cause is often a worn heating element, thermostat or thermocouple, or scale that has built up over the years. Hard water makes the sediment problem more common in North Texas.
Is it worth it to repair a hot water heater?
It depends on what failed and the condition of the heater. If a single part has gone bad and the tank is otherwise sound, repair usually makes sense. If the tank is leaking, or an older heater keeps breaking in new ways, repairs tend to only delay a replacement. Describing the problem and the age of the heater when you call is the quickest way to find out which one you have.
Do you call a plumber to fix a hot water heater?
For simple things, like a tripped breaker or a changed temperature setting, you can check yourself. Anything involving the gas line, the wiring, the relief valve or the water connections is better left to a professional, because mistakes there can mean a flood, a scald or a gas or electrical hazard. If you are unsure, call and describe what you are seeing.
What are the safety precautions for water heater repair?
Turn off the power or gas to the heater before anyone works on it, and shut off the water supply if there is a leak. Never cap or block the relief valve. If you smell gas, leave the house and call your gas utility from outside. Hot water and a failing tank can scald, so keep children and pets away from a heater that is leaking or acting up.
Water heater not working?
Call now to talk through the repair for your heater in Waxahachie, TX and nearby towns.